JM Modern HikaShop - шаблон joomla Видео
In
(06-1) 619-8321
Nuaire

PharmaGard ES (Energy Saver) NU-NTE797 Total Exhaust Compounding Aseptic Containment Isolator

The PharmaGard ES NTE797 Total Exhaust Compounding Containment Pharmacy Isolator creates negative pressure ISO Class 5 clean air environment for aseptic compounding of hazardous drugs and chemotherapy drugs to meet USP 797 requirements.

ÁRAJÁNLATOT, INFORMÁCIÓT KÉREK!

Safety is Not an Option

Cabinet interchange doors shall be interlocked to prevent the inner door from opening when the outer door is open. A motor regulator prevents workzone and interchange to be positively pressured.

Experience Ergonomics

Ergonomic design encourages proper posture reducing fatigue. Large oval glove ports allow full range of motion extending the user's reach. Ability to Sit or stand at a range of heights. Cool white lighting and open sight lines offer greater visibility into the work zone. Large effective work zone reduces arm, neck, and shoulder strain. A counter balance inter-change door and sliding work tray makes bringing new materials into the work zone a breeze. Three IV bar locations provide proper compounding height and distance. 

Quick Change Sharps and Waste

Under the work surface sharps and waste system saves pharmacy space. Containers are held in place by guides to create an air tight seal. Releasing the locking mechanism frees containers moving them down and closer to the user for easy replacement.

When the container lid has been sealed, follow these three steps to change containers:

Step 1. Release locking mechanism by pulling handle.

Step 2. Pull down and out container tray.Remove container block.

Step 3. Remove container from guides and replace.

 

Counter Balance Inner Transfer Window

The counter balance system is hidden within the inter-chamber wall away from sterile product. The window is easily moved up and down with the use of one finger. The NU-NTE797 features a security lock system to ensure the outer door can not be opened while the transfer window is open.

 

Sliding Work Tray

 

Energy Saver Motor

An ultra high efficiency motor saves on your energy bills while increasing filter life lowering your total cost of ownership.

 

TruLaminar Airflow

Unidirectional airflow moving along parallel flow lines at a constant velocity of 35 to 45 fpm (.18 to .23 m/s) at 20 air changes per minute minimizes air turbulence within the work zone lessening the chance for cross contamination creating ISO Class 5 Air Quality.

HEPEX™ Zero Leak Airflow System

The HEPEX™ plenum inflates to provide quiet uniform air without transferring vibration. Positive pressure chambers and ducts are surrounded by negative pressure eliminating potential leaks. HEPEX™ fabrics are incredibly durable. They are flameproof, provide a barrier against water, gases, fluid, and dust as well as resist to chemicals, oils, and greases. It even holds antibacterial properties and is impregnable meaning harmful materials become trapped in the filters.


Attenumount

Vibration and sound control.


Bag-In Bag-Out Filter System

Easy and safe method for the removal of exhaust filter after decontamination that separates the service technician from the filter.

Stanard Features
  • Supply HEPA Filter 99.99% @ 0.3 Microns
  • Exhaust HEPA Filter 99.99% @ 0.3 Microns
  • Permanent Plenum w/ Quick Release Supply Filter Removal
  • Solid State Motor Voltage Regulators
  • Hinged Slanted Window
  • ⅜" (10 mm) Thick Scratch Resistant Polycarbonate Window
  • Flexible Two-Piece Nitrile Sleeve and Glove
  • IV Bar w/ 6 Hooks
  • Left Side Transfer Compartment
  • Hospital Grade Duplex

 

Optional Features
  • Bench Mount Support
  • Telescoping Basestand
  • Auto Lift Basestand
  • Additional IV Bar w/ 6 Hooks
  • Cord Pass Through
  • Pull Out Stainless Steel Tray
  • Storage Trays
  • Right Side Transfer Compartment
  • Dual Side Transfer Compartments (6 ft. Model Only)
  • Three or Four Glove Ports (6 ft. Model Only)
  • Additional Hospital Grade Duplex
  • Seismic Brackets
  • Custom Solutions

Műszaki specifikációk
Model NU-NTE797-400 NU-NTE797-600
Nominal Size 4 ft. (1.2 m) 6 ft. (1.8 m)
Style of Cabinet Bench top/console with optional base stand Bench top/console with optional base stand
Exterior Dimensions (W x D x H)
in. [mm]
50 x 32 ½ x 51 ½ 
(1270 x 826 x 1308)
74 x 32 ½ x 51 ½ 
(1880 x 826 x 1308)
Interior Dimensions (W x D x H)
in. [mm]
35 ¼ x 23 ¼ x 27 ⅜ 
(895 x 591 x 695)
59 ¼ x 23 ¼ x 27 ⅜ 
(1505 x 591 x 695)
Interchange Dimensions (W x D x H) 
in. [mm]
14 ⅛ x 24 x 27 ⅜ 
(359 x 610 x 695)
14 ⅛ x 24 x 27 ⅜ 
(359 x 610 x 695)
Weight 465 lbs. / 211 kg. 615 lbs. / 279 kg.
Downflow Velocity 35 to 45 fpm (.18 to .23 m/s) 35 to 45 fpm (.18 to .23 m/s)
Exhaust CFM/CMH Standard:
Plan Duct Static Pressure Eng/Metric: (water gauge)
425/722
2.0”/w.g./51 mm w.g.
550/935
2.0”/w.g./51 mm w.g.
Heat Rejected, BTU, Per Hour 539 880
Light Intensity foot-candles (LUX) 40 to 80 (439 to 860) 40 to 80 (439 to 860)
*Add 3" (76 mm) for base stand    
Accolades CETA CAG-002-2006, ISO Class 5, UL, UL-C, CE, Energy Saver, Personnel Product Environmental Protection, USP 797 Compliant, RoHS
Please note specifications are subject to change. Please contact NuAire to verify before purchase. 
Applikációk
  • Performance Evaluation of Model NU-NTE797
  • Main Chamber Pressue Specification Change
Tartozékok, kiszerelések
Videók, ismertetők

blue down arrowForgalmazott termékeink gyártói - keressen gyártó szerint a logóra kattintva