(06-1) 619-8321

In-VitroCell ES (Energiatakarékos) légköpenyes CO2 termosztátok, inkubátorok, NU-5800 sorozat

Az In-VitroCell ES (Energiatakarékos) NU-5800 sorozatú közvetlen fűtésű 200 liter hasznos térfogatú CO2 termosztátok, inkubátorok egy megbízhatóan szabályozott in vitro környezetet biztosítanak a szöveti sejttenyészetek optimális növekedéséhez. A kamra által biztosított környezet alkalmassá teszi ivarsejtek és állati szöveti sejttenyészetek tárolására, megőrzésére testhőmérséklet közeli hőmérsékleten.

ÁRAJÁNLATOT, INFORMÁCIÓT KÉREK!

Leírás

Features

Constant Contamination Control

Closed Loop HEPA Filtration – Maintained at positive pressure, gas and air entering the growth chamber continuously pass through 99.99% @ 0.3 microns efficient HEPA filters producing

an environment similar to an ISO Class 5 cleanroom.

Dual Sterilization Cycles – 145°C dry or 95°C humidified, sterilization cycles help eradicate potential contamination threats when switching cell lines or performing routine cleaning procedures.

Coved interior corners – A crevice-free interior is easier to clean eliminated potential growth areas within the chamber.

CuVerro Antimicrobial Surfaces add CuVerro® Antimicrobial Copper Surfaces (optional) - to the incubator growth chamber and shelving to kill bacteria* to minimize potential contamination.

CuVerro® is laboratory tested and EPA registered. CuVerro® Antimicrobial Copper Surfaces kill more than 99.9% of bacteria* within two hours, and continues to kill 99% of bacteria* even after repeated contamination and regular cleaning.

Temperature Uniformity by wrapping the chamber with direct heating elements and monitoring the chamber with dual temperature sensor probes model NU-5700 offers temperature uniformity within 0.3°C at 37°C.

CO2 Gas Accuracy - using a dual wave infrared (IR) sensor that is insensitive to other components, such as water vapor, the chamber maintains CO2 levels accurate within 0.1%.

Growth Condition Recovery – Quicker and more stable, In-VitroCell CO2 Incubators recover gas and temperature back to set point faster than other CO2 Incubators.

NuTouch Electronic Control System (ECS) – easily control system parameters with the touch of a finger. The NuTouch ECS is a user-friendly touchscreen LCD that allows for the control of

parameters and offers status indicators, onscreen instructions, and notifications to assist with proper use.

Hypoxic Conditions – models NU-5831 and NU-5841 provides the ability to suppress oxygen in the growth chamber by injecting N2 gas to meet set point by monitoring and controlling oxygen using a sensor.

Humidity Control – standard CO2 incubators create humidity in the growth environment by heating a water pan. Models NU-5820 and NU-5841 feature a reservoir to inject humidity into

the growth chamber to meet set point monitoring and controlled by using a sensor.

Disclaimer: Laboratory testing shows that, when cleaned regularly, CuVerro surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: Methicillin-Resistant Staphylococcus aureus (MRSA), Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, E. coli O157:H7, and Vancomycin-Resistant Enterococcus faecalis (VRE). The use of CuVerro® bactericidal copper products is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. This surface has been shown to reduce microbial contamination, but it does not necessarily prevent cross contamination. CuVerro® is a registered trademark of GBC Metals, LLC and is used with permission.CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor, CO2 termosztát, CO2 inkubátor,

Műszaki specifikációk

Standard Features

NuTouch Electronic Control System

Closed Loop HEPA Filtration System

100% Stainless Steel Coved Interior Chamber

Dual Temperature Sensor Probes

Infrared (IR) CO2 Sensor

Dual Sterilziation Cycles (NU-5710, 5720, 5731, 5741)

Humidity Control System (NU-5720, 5741)

O2 Control System (NU-5731, 5741)

Four (4) Stainless Steel Shelves

Eight (8) Stainless Steel

Shelf Guides

Four (4) Wall Brackets

Heated External Right Hinged Door Swing (Field Reserveable)

Inner Right Hinged Door Swing (Field Reserveable)

Remote Alarm Output Contacts

RJ-45 4 to 20 mA Analog Output

RJ-11 Communication

RS-485 Communication

USB Port

CO2 Sample Port

Adjustable Leg Levelers

Access Port and Plug with Breather Holes

One (1) Water Pan

One (1) 6.5 ft. / 2 m Electrical Cord

Temperature Control System

Temperature Sensor Type:

Precision Integrated Circuit

Default Set Point: 37°C

Chamber Temperature Range: 5°C to 55°C (5°C Above Ambient to 30°C Max. Ambient)

Chamber Temperature

Uniformity: ± 0.3°C @ 37°C

Temperature Accuracy: ± 0.1°C

Temperature Recovery: 0.12°C/Minute Average

Temperature Display Resolution: 0.1°C

Minimum Qualifications for Sterilization:

145 DEG Cycle 135°C

95 DEG Cycle 85°C

Electrical Requirements

Startup Power: 625 watts

Running Power: 250 watts, 60 Hz

Decon Cycle: 995 watts

Heat Rejected: 14 BTU / min.

Utility Connections

Gas Connections: 0.25 in. (6.3 mm) Tubing Connections

Gas Input Pressure: 20 PSIG (1.4 BAR) Input Pressures

Maximum. Two-Stage Gas

Regulators Required.

C02 Control Systems

CO2 Sensor Type: Infrared Single Source Dual Wave Length

CO2 Control Logic: Fixed Algorithm / Manual Environmental Adaptable.

Default Set Point: 5%

CO2 Range: 0.1 to 20%. (0.0 Set Point Idles System)

CO2 Accuracy: ± 0.1%

CO2 Recovery: Up to 5% -0.50% / +0.20% in 5 Minutes Average.

CO2 Display Resolution: 0.1%

RH (NU-5820 / 5841)

Default Set-Point: 90%

RH Range:

5% Above Ambient to 95%*

RH Accuracy: +5% / -3%

RH Recovery: 90% + 5% / - 3% 25 min.

RH Water Tank Capacity: 3 Liters (approximate)

RH Evaporator Tank Temperature: Chamber temperature set point +10C *Set point to 90% plus 5% tolerance

O2 (NU-5831 / 5841)

Zirconia Ceramic Sensor

Default Set-Point: 21%

O2 Range: 0.5 to 21%

O2 Accuracy: ± 0.25%

O2 Recovery: 5% ± 2% / 20 min.

Applikációk

- RS-485 Communication for In-VitroCell Incubators
- 4-20mA Analog Output for In-VitroCell CO2 Incubators
- Improve the Performance of your CO2 Incubator
- CuVerro® Care and Use
  
  NuAire products manufactured with CuVerro® have specific care and use instructions to assure maximum customer satisfaction. CuVerro® is a class of copper based alloys that continuously kill bacteria associated with life science laboratory contamination. These surfaces represent the only class of EPA-registered solid surface materials that actively kill bacteria. CuVerro® is suited for common surfaces where contamination is a concern. Laboratory surfaces benefitting from CuVerro® are inherently any work surface that can harbor contamination. NuAire fabricates CuVerro® in many ways to produce a variety of products for the laboratory. Understanding the care and use of CuVerro® will maximize its benefit and visual appearance. Find additional information at www.cuverro.com.
  
  CuVerro® may be cleaned with various laboratory surface disinfectants by different methods. For all surface disinfectants, follow application and use instructions provided by the manufacturer. Download the whitepaper to view a list of surface disinfectant types and their visual effect on CuVerro®. --- CuVerro® Care and Use

Tartozékok, kiszerelések

IsoBar Surge Suppressor
CO2 Regulator Two Stage
N2 Gas Regulator
Dry In-Line Filter
Wet In-Line Filter
Refill CO2 Analyzer Fluid Kit
CO2 Analyzer Fyrite Kit
Refill O2 Analyzer Fluid Kit
O2 Analyzer Fyrite Kit
External Tank Switch
CO2 Regulator, Single Stage
CO2 Incubator Tubing
Mobile Platform with Leg Leveling Casters and Mounting Brackets for In-VitroCell ES CO2 Incubators
CO2 Incubator Tank Alarm
Stainless Steel Incubator Shelf and Guide Brackets (In-VitroCell ES Series)
Incubator Water Pan (In-VitroCell ES Series)
CuVerro® Antimicrobial Copper CO2 Incubator Shelf and Guide Brackets (In-VitroCell ES Series)