JM Modern HikaShop - шаблон joomla Видео
In
(06-1) 619-8321
BIO SCIENCE
Beckman Coulter

Avanti JXN-30 nagykapacitású, nagy fordulatszámú laboratóriumi centrifuga
glb_bci_155799
6480_AvantiJXN30_screen
Simply get results.

High throughput and high productivity are standard fare for every Beckman Coulter centrifuge and the Avanti JXN Series is no exception. It’s more than capable of delivering solutions for shared labs, GMP environments, networked instruments and more.

With the Avanti JXN Series centrifuges, you will not only manage your daily laboratory challenges, but get higher performance, better BioSafety,* and advanced levels of networking. With the MobileFuge app, you can access modern data and user management, remote monitoring, control and error handling via networks, and mobile devices.

ÁRAJÁNLATOT, INFORMÁCIÓT KÉREK!

WORK FAST. WORK SAFE. WORK REMOTELY.


Whatever your application, from simple pelleting to rate zonal separations, the Avanti JXN Series offers newfound momentum. Rely on the Avanti JXN-26 to boost your productivity, or reach speeds of up to 30,000 rpm with the Avanti JXN-30.

Flexibility reaches a whole new level with the MobileFuge remote application for Avanti centrifuges. Users can easily monitor and control centrifuge functions via computer, using Virtual Network Computing (VNC) software, or mobile device using the custom MobileFuge app available for Apple® iOS and Android™ devices. Whether you are across the lab or across the campus, you can always keep an eye on your centrifuge. Work has never been so flexible.


Ergonomic design

  • Low work surface height for easier installation and unloading of rotors
  • Foot pedal for hands-free door operation
  • Door swings up and out of the way for easy access to the rotor chamber
  • Large digital readouts make operation simpler

Gain flexibility with MobileFuge

  • Set and monitor run parameters and email diagnostic results
  • Control and monitor the centrifuge from your Apple® iOS and Android™ device with MobileFuge
  • Get alerts and diagnostics remotely

Intuitive interface

  • User-friendly, large LCD screen
  • View set and actual run conditions simultaneously
  • Select rotor by name, not by arcane number code
  • 12 accel/13 decel rates
  • Delay start
  • Run times to 99:59, Hold, and ω2t integrator for applications that require exquisite reproducibility
  

Safe and sustainable

  • Friction Reduction System (FRS) allows quicker, quieter, and cooler runs
  • Uses less energy than traditional centrifuges
  • BioSafe* options
  • Dynamic rotor inertia check
  • High-torque, Switched Reluctance (SR) drive cycle shortens cycle times

Advanced, easy-to-use data management

  • Perfect for shared labs or GMP environments
  • On-screen text sensitive “help” screen
  • Up to 1000 user-defined programs
  • Set up and store numerous protocols
  • Password protection for up to 50 unique user profiles
  • Network multiple instruments
  • Data logging and real-time run graphing

Versatile across rotors and applications

  • Compatible with an extensive library of rotors
  • Fixed-angle and swinging bucket options available
  • Fully compatible with lightweight J-Lite rotors
  • Dynamic Rotor Inertia Check (DRIC) and rotor recognition provide redundant safety checks to assure no rotor can be run above its rated speed
  • Temperature control is optimized ensuring sample quality and avoiding unwanted artifacts
  • SW and FA rotors capable of greater than 100,000 x g.
 

*BioSafe and BioSafety are terms intended to describe the enhanced biocontainment features of our products.

nagykapacitású, nagy fordulatszámú laboratóriumi centrifuga

nagykapacitású, nagy fordulatszámú laboratóriumi centrifuga

nagykapacitású, nagy fordulatszámú laboratóriumi centrifuga

nagykapacitású, nagy fordulatszámú laboratóriumi centrifuga

 

Műszaki specifikációk
UNSPSC: 41103905
Height: 86 cm (34 in); with door open 141 cm (55.5 in)
Height, door closed: Height of 86 cm
Height, door open: Height of 141 cm
Width: 71 cm (28 in.)
Depth: 86 cm (34 in.)
Weight: 310 kg (680 lb)
Dimensions: 71W x 86D x 86H cm(28W x 34D x 34H in)
Drive Cooling: Air-Cooled
Drive Type: SR* Drive
Friction Reduction System (FRS): A mechanical rotary vane pump reduces the chamber pressure for improved performance
Max Capacity Volume Range: 4 Liters
Max Speed: 30,000 rpm/110,500 x g
Maximum Heat Dissipation into Room under Steady-State Conditions: 1.5 kW (5120 Btu/hr) (JA 20 rotor running at 20,000 rpm at 4 degrees C
Noise level at max. speed (approx.):  
Refrigeration System: Non-CFC, non-ozone depleting refrigerant
Rotor ID: Automatic
Set Temperature: -20° C to 40° C in 1° increments
Set Time: 1 min to 99 hr, 59 min
Speed Control: 1 k to 10 k: ±10 rpm10,001 to max: ±0.15%
Speed Range: 500 to 30,000rpm or equivalent RCF
Temperature Control: ±2° C of chamber temperature(after equilibriation)
Zonal Capability: Yes
Single Tube Sample Volume Range: 1.5 - 1,000 mL
Ambient Temperature Range: 16° C to 38° C
Clearances Required: 7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
Door: 6.1 cm (2.4 in) thick plastic resin with steel plate
Humidity Restrictions: <80% (noncondensing)
Pollution Degree: 2
Rotor Chamber Diameter: 51.3 cm (20 in)
Time -- Actual Display: Real-time run monitoring, time elapsed, time remaining, hold.
Maximum Force at r max (g): 110,500 x g
Acceleration: 11
Deceleration: 12
 

*BioSafe and BioSafety are terms intended to describe the enhanced biocontainment features of our products.

Tartozékok, kiszerelések
339380 Brush, Rotor Cleaning, 32 mm/1-1/4 in, 38 mm/1-1/2 in (Min Order 3)
369681 J-LITE® JLA-10.500 Rotor, Fixed Angle, Aluminum, Biosafety Liquid Canisters, 6 x 500 mL, 10,000 rpm, 18,600 x g
363930 J-LITE® JLA-16.250 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 6 x 250 mL, 16,000 rpm, 38,400 x g
363934 J-LITE® JLA-16.250 Rotor, Single Lock, 6x250mL, 16,000 rpm, 38,400 x g
366754 J-LITE® JLA-9.1000 Rotor, Fixed Angle, Aluminum, 4 x 1,000 mL, 9,000 rpm, 16,800 x g
969330 J-LITE® JLA-9.1000 Rotor, Fixed Angle, Aluminum, 4 x 1,000 mL, 9,000 rpm, 16,800 x gwith Polycarbonate Bottles
969331 J-LITE® JLA-9.1000 Rotor, Fixed Angle, Aluminum, 4 x 1,000 mL, 9,000 rpm, 16,800 x gwith Polypropylene Bottles
369687 JA-10 Rotor, Fixed Angle, Aluminum, 6 x 500 mL, 10,000 rpm, 17,700 x g
360992 JA-12 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 12 x 50 mL, 12,000 rpm, 23,200 x g
360993 JA-12 Rotor, Single Lock Lid, 12 x 50 mL, 12,000 rpm, 23,200 x g
339247 JA-14 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 6 x 250 mL, 14,000 rpm, 30,100 x g
B19956 JA-14.50 Rotor Assembly
B19955 JA-14.50 Rotor Assembly, Bio-Contained
369691 JA-17 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 14 x 50 mL, 17,000 rpm, 39,800 x g
369679 JA-18 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 10 x 100 mL, 18,000 rpm, 47,900 x g
347824 JA-18.1 Rotor, Fixed Angle, Aluminum, 24 x 1.8 mL, 18,000 rpm, 42,100 x g
334831 JA-20 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 8 x 50 mL, 20,000 rpm, 48,400 x g
342095 JA-20.1 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 32 x 15 mL, 20,000 rpm, 51,500 x g
334845 JA-21 Rotor, Fixed Angle, 18 x 10 mL, 21,000 rpm, 50,400 x g
363050 JA-25.15 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 24 x 15 mL, 25,000 rpm, 74,200 x g
363054 JA-25.15 Rotor, Single Lock Lid, 24 x 15 mL, 25,000 rpm, 74,200 x g
363058 JA-25.50 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 8 x 50 mL, 25,000 rpm, 75,600 x g
363055 JA-25.50 Rotor, Single Lock Lid, 8 x 50 mL, 25,000 rpm, 75,600 x g
363420 JA-30.50 Ti Rotor, Fixed Angle, Titanium, Biosafety Lid, 8 x 50 mL, 30,000 rpm, 108,860 x g
363421 JA-30.50 Ti Rotor, Single Lock Lid, 8 x 50 mL, 30,000 rpm, 108,860 x g
357521 JCF-Z Continuous Flow Rotor, Large Pellet Core, Titanium, 1,250 mL, 20,000 rpm, 39,900 xg
357544 JCF-Z Continuous Flow Rotor, Small Pellet Core, Titanium, 240 mL, 20,000 rpm, 36,300 x g
335140 JCF-Z Continuous Flow Rotor, Standard Pellet Core, Titanium, 660 mL, 20,000 rpm, 39,900 x g
354005 JCF-Z Reorienting Gradient Rotor, Titanium, 1,750 mL, 20,000 rpm, 39,900 x g
336283 JCF-Z Rotor Replacement Kit, Titanium, Body Only, 20,000 rpm, 39,900 x g
354006 JCF-Z Zonal Rotor, Titanium, 1,900 mL, 20,000 rpm, 39,900 x g
347514 JE-6B Elutriator Rotor, 6,000 rpm, 5,080 x g
346963 JS-13.1 Rotor with Carrying Handle, Swinging-Bucket, Aluminum, 6 x 50 mL, 13,000 rpm, 26,500 x g
362396 JS-24.15 Rotor with Buckets, Swinging-Bucket, Aluminum, 6 x 15 mL, 24,000 rpm, 110,500 x g
360743 JS-24.38 Rotor with Buckets, Swinging-Bucket, Aluminum, 6 x 38.5 mL, 24,000 rpm, 103,900 x g
369331 JS-5.9 Rotor with Microplate Kit, Swinging-Bucket, Aluminum, 10 x 96-Well Plates, 5,900 rpm, 6,570 x g
336380 JS-7.5 Rotor with Buckets, Swinging-Bucket, Aluminum, 4 x 250 mL, 7,500 rpm, 10,400 x g
362212 JS-7.5 Rotor, No Buckets, 4 x 250 mL, 7,500 rpm, 10,400 x g
870139 O-Ring, Lid, Rotor, JA-10, 203 mm ID x 208 mm OD (qty 1)

blue down arrowForgalmazott termékeink gyártói - keressen gyártó szerint a logóra kattintva